Konnected Works good -Drop In Replacement for old alarm board-
Panel does everything you expected- a drop in replacement for my exisiting panel. Configuring and addding the Konnected driver "Alarm" etc. proved to be frustrating as I loaded the software and had it in the HPM manager for my Hubitat controller but it simply would not work. I wasn't until I asked HPM to repair the "Konnecred ALARM driver" that bang! it works and works well. All the child devices showed precisely as configured. Be prepared to install and read a bit. Otherwise it's a great little product. My motion, window, doors all work and detect correctly. I used a 3amp 12Volt powersupply to inusre alarm siren etc will operate. Plan to add CO2 and fire alert detectors as the old system and the company wanted an arm a leg for that. Solid product.
M
Musee Tech
★★★★★
Rock Solid Product and Top Tier Support
The Konnected board is everything and more. This is honestly the best product I have purchased in a long while, and I am 100 percent satisfied with both the hardware and the overall experience. The setup was straightforward, the integration with my existing system worked flawlessly, and the performance has been rock solid.
What really sets Konnected apart, though, is the support team. Their responsiveness, technical knowledge, and willingness to help made a huge difference and turned what could have been a complicated project into a smooth and enjoyable one. It is rare to find a product this well designed backed by a team that genuinely cares about customer success.
Thank you for an outstanding product and excellent support. Keep up the great work.
Murph
★★★★★
Still great in 2025! Gave an old off system new life! Use Home Assistant!
This has been on my wishlist for a long long time (seriously like years) and decided to finally pull the trigger. Our old system had been turned off for over a year because it was failing and beeping so decided to go this route. I really had nothing to loose. I was a little worried as their hasn't been much updates on this device over the years, and the app itself wasn't rated very well at all. Good new is everything is legit in 2025.
I watched the YouTube install video and then labeled all the wires and installed it and powered it via POE and everything worked! Took me maybe 45 mins total. I used the konnected app to configure, name and update the device. That was the last I used the app. Then went over to Home Assistant (HA) and it found it immediately (dont use the legacy konnected integration use the ESPHome integration) and was able to get everything working! I believe the key is the Home Assistant part as it allows remote connectivity and create rules.
Then I built a dashboard in HA of all my sensors using my floor plan and using AI (Claude) to generate the code to create boxes where my windows and doors are and change colors based on status (open or closed). I created alerts and even created weather based alerts if windows are open, also using Claude to help with the process. I would highly recommend this if you have an old wired security system as it gave new life to something already wired throughout the house.
I then went around and removed all the controllers from the walls and all the extra parts, cleaned up the walls and painted them. Debated on putting some tablets in their place as there are kits to convert the power to USB. I decided I would just use my phone/computer/tablet and never really use those hard mounted tablets. Ended up being a great solution and I and wifey are very happy as its very clean and the dashboard is way more valuable then the old system ever was!
L
Luke Skywalker
★★★★★
Worked well for me, after figuring out the quirks.
It works but took some “doing”. There were no instructions included but a very good video from the seller on YouTube. I had no trouble connecting to Wi-Fi, or randomly disconnecting as some complained about. (3 weeks now), Just left the metal door open. If you want a sealed metal box I’d suggest hardwire Ethernet. Problems: buzzer…. Had polarity reversed, my vision is poor. Buzzer connectors were not very tight in the board pin side. I’ve got pins and a crimper but don’t want to use them unless this becomes a problem, Siren: Old one was hooked to “speaker” and the sound driver was on the old board, so had to buy another siren, $10. Nit a bug deal but took awhile to figure out.
As far as telling me that the a zone has been tripped, door open, motion sensors tripped , it has been flawless. Works each and every time, SmartThings sending me an alert or txt. The family that lived here before us never used the old alarm system, now I’ve repurposed the old reliable wired switches.
