Pyle PDWMU211 Dual UHF Wireless Microphone System

Low Quality Control

The antenna fell out of the receiver before the first use. Ordered a replacement and will update when the second unit is sent and tested.

Yoku Love

September 27, 2024

Bad product

I barely opened this product and the cap for the aux came off by it self. Not worth it.

0:24

One time two microphon did 't work

Ys

Carlos Contreras

April 11, 2023

Easy connectivity, working in seconds

I really love this product, working good as soon as you open the box, batteries included, just turned mic and receivers on and that’s it, you’re sounding on the speakers.

0:17

Gingerbread Diva & Me

March 4, 2023

Unboxing, Parts, Operation and & A VERY, VERY, BAD THING.

The cover of the box I received showed the same transmitters and receiver, but only 1 lavaliere mic and one headset.

So I start out grumpy and thinking I need to send it back. Then my wife suggests I open the box—she is smart like that—and inside was the additional mic and headset. This explains why the box had a slight bulge to it, it looks like they stuffed more than the box was designed to hold. Still had the PYLE seal tape on it. So all good. Everything listed was there.

Batteries

The rechargeable battery for the receiver is a large purple lithium battery. I put it into the receiver and then I plugged it to a charger using the USB cable provided. A USB charger is not provided, just the cable. It took about 3 1/2 hours to charge over USB. A solid red light came on when it started charging. It went out when it was charged. The purple battery doesn’t have any markings on it. I always try to have a backup battery handy. No info on the battery. I located a flashlight that uses the same size and then, after charging the purple battery, tested the voltage of both batteries to see if they were interchangeable—they are. The flashlight battery works in the receiver and it came with a wall charger. You can see the type of battery from the photos. There are also pics of the flashlight wall charger. Watch for deals on those types of flashlights and chargers and you can pick up a spare.

Transmitters

Positive: The Transmitters are light and have 2 really great features: They have a digital read out that shows frequency and they show battery level. The battery level is an absolute must. Way to go Pyle! The power/volume knob on the top is easy to access. Each transmitter takes 2 AA batteries and they can use rechargeable batteries. I like bring extra batteries and slapping them it if needed. So that was a good thing

Both types of microphones plug in AND THEN screw into the transmitter.

Negatives:

That battery compartment. It just feels cheap and ready to break. If it was just for the batteries, I would worry less. But the fact that you need to open and close it whenever adjusting the frequency means more opening and closing than I am comfortable with. The first time I opened the battery compartment on the transmitter, my initial thought was that I need to make sure I have some tape packed with me to hold it in place when it breaks. It just feels that flimsy. Also the LED digital display on one of the transmitters was crooked, see photo. Speaks to quality control, but more on that later.

Receiver

I needed to use it with the 1/4 inch to mini-plug adapter, with that adapter it has some serious height on it. This makes me a little nervous. Seems like it could get bent easily. This observation was prophetic. The battery sliding battery cover feels cheap. There is also no explanation of the lights on the side as far as what color means what: Is red good? Bad? This makes it hard to trouble-shoot.

It was supposed to be plug and play…

The VERY, VERY BAD THING and a solution

And this is where I got grumpy again:

The receiver and the transmitter wouldn’t pair up no matter what. The printed directions to pair up are flawed. They tell you to press the “down” button at the same time as the “on” button until it flashes 4 times “and then release the ‘up’ button” Huh? No help here.

SO I try every combination, everything, I mean everything. Nothing flashes, nothing works. Wishing I had sent it back before my wife told me to open the box—I was gearing up to blame her. And then I decided to test every component by itself. Went through everything—And I finally I get down to the adapter.

The little tiny 1/4 inch to 3.5mm adapter. On closer inspection it appears to be slightly bent—so I get the multimeter out and…it doesn’t check out for continuity: It. doesn’t. work.

I dig in my wiring box and find a Radio Shack adapter from the 80s. It is a stereo plug, not mono, but I try it. It works. Guess what? Now everything works.

The volume on the transmitters isn’t as loud as I want them to be, but they will do and I will keep them.

Now I am a little concerned that I was sent a damaged adapter, does that mean that I was given a return?

The plastic cover coating on the transmitters WAS scraped up a bit. The LED read-out on one transmitter WAS askew. There WERE scratches near the down buttons—maybe someone went through the same thing I went through?

Will update after using them.

Best Bang for your Buck!

I especially liked the instructions. They were cheat and easy to understand. Set up was quick and easy. The sound quality was superb! You can't beat this quality firnthis value! I'm a PYLE FAN!

0:45

Sounds good so far, even came with a 1/4” to 3.5mm adapter.