Schwer ProGuard PR3727 Cut Resistant Work Gloves

Defective

Not sure if I received a defective pair, but they started degrading and had to return. Will not be repurchasing and would not recommend. Picture is after only wearing them 4 times.

Falling apart in less than a week

Had them less than a week

Great Protection for Garden Work!

I originally bought these gloves for general yard work, and they’ve quickly become my go‑to for pulling weeds in my garden. Some of the weeds around my yard are pretty thorny, so I’m always hesitant to just reach in and grab them. These gloves give me a real sense of security—the cut‑resistant material keeps my hands from getting scratched up, and I can pull even the tougher weeds without worrying.

They fit comfortably, have good grip, and the coating makes it easy to hold onto roots without slipping. I also love that they’re flexible enough for more detailed work and even work with my phone when I need to look something up.

If you do any kind of gardening, especially with thorny plants, these are absolutely worth it. My hands have never been happier!

Great gloves that actually fit to advertised size.

I use a lot of gloves and my biggest complaint with most is that they do not fit to the size that they are advertised at.

I got these XXL gloves and they DO fit perfectly.

The elastic wrist band areas go quite far up the wrist and are snug but comfortable.

The dipped hand and fingers areas give good grip while still providing flexibility and dexterity. I would say that the thickness of the gloves feels "medium". They are thick enough to be safe and protective and thin enough to use as mechanics gloves with good dexterity. A very versatile glove that can be used everywhere from gardening to mechanic work.

I did confirm that the touch screen fingertips do work as described too.

These are competitively priced compared to similar gloves that I have purchased in the past.

0:08

Comfortable and true-to-size

These gloves met all my expectations. I used them for general yard work, then washed them and used them to debone a pile of chicken thighs. They were comfortable, true-to-size (XL was a perfect fit!), and offer a great grip. My phone's touch screen worked perfectly and I was easily able to pull up a YouTube video or adjust the music I was listening to.

I only did limited testing on the cut resistance. The gloves come with a warning not to test them by deliberately cutting into them while wearing them because they *will* give away if you try hard enough. But for working with the chicken I was confident in moving quickly and not worrying about incidental contact with the blade while I was taking out the bones. The grip was great for that task too.

When I went to wash the gloves I was slightly surprised that they weren't waterproof with the nitrile coating, but the coating "only" covers 3/4 of the glove and the water probably got wicked in from the uncoated area.

All told, I'm completely satisfied with these gloves and the current price of 13.99 ($12.59 with a coupon) seems entirely fair for a quality, durable product like this.

A good investment to protect your hands!

I wanted these for my garage and home work, where I can find myself dealing with raw metal edges, files, glass, and abrasives.

These seemed to fit like other gloves I have in the same size (xl in my case). The coating has really good grip, which is a nice feature for handling oil filters and hand tools. I was also able to interact with my phone screen without taking the gloves off, which is SO convenient.

These are more flexible than some thicker gloves I’ve had, which offers good dexterity for finer work. The coating around both the front and back makes them a little less breathable than palm-only coated gloves, but the general lightness of the fabric compensates for that some. And having the back coated does offer more protection from the oil that sometimes runs down a filter right onto my hand.

Cut level six offers quite a bit of protection, and I suggest getting a pair to protect some of your most important tools—your hands!

Galaverna

March 24, 2026

Good quality cut resistant gloves

I ordered these cut resistant gloves for my husband, who goes through a lot of gloves.

He likes these because they fit well and aren't too loose. They are comfortable and flexible while still being protective. They allow you to get a good grip without slipping.

I tried them out myself today as well and, while the medium is too big for my hands, I did like how thick they feel. I have used other cut resistant gloves that feel thinner. These have a nice thickness, not just with the resistant part but also the rest of the gloves.

He was still able to use his phone to make phone calls while wearing them so the advertised touchscreen compatibility is accurate.

These are a really good pair of gloves and durable. The value seems comparable to a quality pair of gloves from well-known home improvement stores.

Good grip and fit

I've been using these gloves for some repairs around the house, outdoor work, and cleaning up the garage. They've been working well for these purposes. Have prevented cuts and scratches with dealing with tools or metal scraps. They've been doing a good job of providing protection when picking up sharp things but I don't think these would provide enough protection if you were to run a blade across them with any velocity and won't protect against nail punctures if you were let say hammering.

I find that these gloves fit snuggly which I think works well if you need to do some tasks that require some dexterity. You might want to size up if you prefer gloves that aren't as snug. Additionally I like the grippyness of the gloves especially when moving things.

Overall I think these are a nice set of versatile gloves. They give some cut protection but also grippy which makes them useful all around the house/yard.

Run a little small, hard to penetrate, good tactile feel.

Schwer ANSI A6 Cut Resistant Gloves, CR3709 Cut Proof Work Gloves, Touch-screen Cutting Gloves, 3/4 Dipped Coating for Woodworking, Glass Metal Cutting, Construction, Fishing.

I wore an XXL and ordered an XXL. These gloves are snug on my hands, I prefer them slightly larger but these are usable and maybe even safer when snug. I have good tactile feel wearing these gloves and the ability to use a touch screen is a bonus. I don’t think I would test these against a sharp knife directly but I do feel these will inhibit a deep cut if say you are using a chisel and you slip and catch your hand. It should totally deflect a cut like that. I can not tell how puncture proof they are. I feel they would also slow the piercing down and reduce the wound. Overall I am sure I am safer using these gloves rather than a cotton or rubberized glove.

Cut Resistant Gloves

In our neighborhood, we’re mandated to dismantle cardboard boxes before recycling them, which has led me to frequently use a box cutter.

I’ve been using these gloves for a few days now, and I’m thoroughly impressed. I’ve given them a solid 5-star rating. They’re made from high-quality material that appears incredibly durable, so they should withstand numerous cutting sessions. Additionally, the gloves have a rubber coating that improves grip.

These gloves are true to size. I usually wear a size 10, but I opted for the size 11 because I thought they might be a bit small. While the larger size is a bit too big for me, the increased fit makes them incredibly easy to use. Putting them on and taking them off is a breeze. However, if I were to order another pair, I’d probably stick with a size 10.

The standout feature of these gloves is they provide a reasonable amount of cut protection while still allowing me to maintain good dexterity. Overall, I consider them a great value for the money and a reliable choice for cut-resistant work gloves.

Blake Smallwood

March 22, 2026

Perfect fit

I got these gloves for work (ups warehouse) and for unloading trucks. It’s like night and day difference with them. My grip for the packages was perfect. They kept my hands warm during the colder months and they can go right in the wash with my clothes. They protect my hands from nails sticking out of the pallets or chipped wood and they fit my hands perfectly

Andre

March 21, 2026

Comfortable and Excellent Fit

These gloves are great, really fits well and allows for ease of movement. Definitely a step above the usual work gloves my shop provides me with. Durability is great, and it's easy to put on and take off. The full finger cut resistance is better than the competition, all while it allows you to use your phone whenever needed.

I question the cut resistance.

1 The gloves and made of polyester with a metal wire and conered with a Nitrile. They resemble the gardening gloves that I use. The description makes these gloves seem like they offer added protection from cuts from sharp objects because they are "cut-resistant certified, offering exceptional protection against medium to heavy cut hazards".

The gloves come with any insert that says not to use sharp objects on the gloves for the purpose of testing the properties because you run the risk of hurting yourself.

Cut resistant means that it is resistant to cuts to a point, but can be cut. The description saying "protection against medium to heavy cut hazard" leads me to believe they offer quite a bit of protection. The protection is important to me because my husband is an autobody repair technician and he needs to know the gloves will protect him.

In regards to the gloves themselves, they fit well. You are able to use a phone or tablet touchscreen with no difficulty. The fact that these gloves are washable makes me think that these gloves will be durable and last. I'm not a fan of orange, but there is very little orange color.

Great pair of gloves for protection

These gloves fit very well. I still have a decent amount of dexterity to handle stuff confidently. I tested the gloves with a kitchen knife and I was not able to cut through it. Went and used the gloves to cut some metal with my angle grinder and it protected my hands from the sharp metal. I took the gloves off thinking that there wasn’t any sharp metal to worry about and I ended up cutting my hands. So I’m confident that these gloves worked to protect my hands when I had them on. These gloves work.

0:13

Very Nice Protective Gloves

I am an amateur woodworker and, as such, sharpening and handling various

blades for my tools is a common occurrence. And it is quite usual

that I wind up with some cuts, nicks or abrasions after a typical woodworking

session. In looking for a solution to this problem, I came across the

Schwer ANSI A6 Cut Resistant Gloves, Model CR3709. I like that the gloves are

classified per ANSI/ISEA:105. They are specified to be cut level A6 (medium/heavy);

abrasion resistance level 3 (medium); and puncture resistance level 2 (light construction),

which should be sufficient to protect my hands so I can continue to enjoy my hobby.

The gloves are sized accurately for me (Medium), they fit well, and are very comfortable.

As a bonus, I can use touch screen electronics while wearing them. The nitrile coating makes

the gloves abrasion resistant and provides excellent grip. The included information sheet

specifies the care instructions. All in all, these gloves will be a great addition to my

woodworking PPE...I only wish I had found them earlier!

Finally work gloves that actually fit small hands

These work gloves are great. I have small hands, and it’s honestly rare to find gloves that fit properly right out of the package. These do. No awkward extra fabric at the fingertips, no sliding around.

No weird chemical smell either, which I really appreciate. They also include clear machine-wash instructions, and you can even toss them in the dryer briefly, which makes them easy to maintain.

They’re protective and grippy but still flexible enough that I don’t lose dexterity. I can still handle tools and smaller tasks. Really solid, practical gloves that just work.

Excellent work gloves

Doing a lot of work around the house, and garage, I’m always in the market for good protective gloves. These gloves looked like just what the doctor ordered.

These gloves seem to run a little small. I ordered the large pair, and found that they fit rather snuggly. Not necessarily uncomfortable, but I would choose an extra-large, were I to order again.

They are light weight, but feel very sturdy on your hands. The elastic band ensures that these gloves will not slip off your hands. Against the wife’s suggestion, I tested the cutting protection with these gloves, and they did actually protect my hands. I would say that a direct puncture, may have different results. I wasn’t brave enough to try it. Lol.

For general gardening, auto mechanical related work, and stuff around the house, I’d say these gloves are a great help in protecting your hands. The outer material is course, so that grabbing, and holding tools without slippage, even when wet is a plus.

MY THOUGHTS;

I really like these gloves, other than the size disparity, I’m going to order another pair for the wifey. She likes them to. Any protection while working is always well worth the money spent. I would recommend these gloves.

Great Quality/Protection/Fit!

I ordered these gloves for my upcoming jaunt into becoming a Sharpener for grooming salons. I usually like to try things like gloves, shoes, etc on before buying, but this product's page gave very detailed palm measurements so you can easily determine which size will work for you, and that measurement chart was spot on! These gloves fit... well... like a glove! The cut protection is good, they are comfortable on the inside, and have a rough "grippy" texture on the outside. You can tell that these are high-quality and will be durable enough to withstand a lot of work.

Great value cut-resistant gloves with solid grip

I picked these up for general shop and construction use, and they’ve been surprisingly solid for the price.

The ANSI A6 cut resistance feels legit — I’ve handled sheet metal and sharp edges without any issues. Obviously not indestructible, but they give you real confidence for medium/heavy-duty work. The 3/4 nitrile coating is a big plus too — grip is excellent even with wet or slightly greasy materials, and I like the extra coverage on the back of the hand.

They’re also lightweight and flexible, which is something a lot of cut gloves mess up. You still get good dexterity for tools, and the touchscreen feature actually works, which is convenient on the job.

Only downsides:

Not puncture-proof (don’t expect protection from nails or needles)

Slightly less precision for very fine tasks

Durability is good so far, but long-term wear still TBD

Overall, for ~$12, these are a great bang-for-your-buck safety glove. I’d definitely buy again for general work, woodworking, or metal handling.

Moe Bility

June 8, 2025

Nice set of work gloves 🧤

Nice gloves! I got xxl they fit right! Got them for working on projects to avoid the cuts and scrapes that I usually get.

AMAZING customer service!

First and foremost, these gloves are GREAT. I got them for using when working with wood and building/fixing things, and they are comfortable and do the job nicely. They are cut resistant-- I tested it out ;), and there was not even a scratch on the gloves.

More than that, though, know that this company has AMAZING customer service. I originally got a size Large of these gloves, as I though it would fit me. (When I bought other gloves in the past, I'm pretty sure they were size Large.) However, they were just a bit too tight for me. Maybe my hands have grown since then, or maybe these gloves run a drop smaller. (Check their size chart before you buy!)

I reached out to the company about this, and they were extremely responsive. They sent me a new pair of gloves-- Extra Large, which arrived the next day. If you buy these gloves, know that there's a company standing behind their product, who wants you to be pleased.

Great product, great company. What more could you ask for?! :)

My new favorite gloves

I normally use MaxiFlex Endurance gloves but thought I’d try these. Glad I did. The fit is excellent. No loose fitting areas at all. They feel thick and protective without actually being thick. Movement is unobstructed. You can pickup a penny off a flat floor. I have been using them daily for a couple weeks so far. The only wear I notice is the letters coming off. I don’t consider this to be a problem for me at all. Especially since everything that is supposed to be important about these gloves is so spot on.

I will continue purchasing once these wear.

Mike

February 18, 2025

Great work gloves

I got these because I'm building a deck which will have a galvanized metal roof and the galvanized metal can have sharp edges and it's best to handle it with som good cut resistant gloves. These are working great and the coating provides some nice grip. The large size fit my hands well and they are also quite comfortable to wear and I have a very minimal loss in dexterity while wearing them.

Yoga Cat

February 14, 2025

WONDERFUL Gloves!

I ordered these because I had to move some items where black widows were lurking. I figure if it can stop a knife it can stop a spider.

These are SUPER comfortable. I'm a woman and the small size 7/5 fit me perfectly. It's easy to move in them. They are flexible & tight enough to give me extremely good dexterity in them, unlike many gloves. (Speaking of "Dexterity" they do remind me of Dexter a bit, lol.)

I store them with a hair band holding them together. (See the second picture.) That way I can be sure not to lose one.

I'll be using these a lot in the future. Definitely a good value!

Slice Resistant Fabric Top

These gloves are comfortable and resist cuts well.

They don't protect against punctures. I could easily feel the screw tip poking through with even moderate pressure. But they are for protecting against slicing, which seemed to work.

Neither serrated bread or steak knives, nor sharp kitchen knives cut the fabric top, so they seem to protect as advertised. I didn't try using a saw, or anything electric.

I'm not sure why they have the rubberized palmar side. It may be because only the dorsal side has slice-resistant fibers.

Great safety when working with sharp objects.

These gloves are near the top of the ANSI ratings for cut resistant gloves. They are A7 rated (4000-4999 grams of cut resistance). The top of the rating is A9. I am a knife collector, and I have been "bitten" a time or two while cleaning or sharpening my knives, and decided that these gloves would keep that from happening. The gloves are fabric with a neoprene coating on the palms and fingers. I tried pressing the blade of one of my knives into the palm of the gloves and could see no damage, likewise, no damage with a slicing move across the palm. The gloves still work with screen interactions on phone or equipment touch screens. Sizing is accurate if you follow the measurement guide in the listing. Great product. Highly recommended!

Great

I have started using gloves with an ANSI cut rating as my general purpose work gloves, because the cut-resistant material seems to be universally better than the basic cotton whatever on the bulk gloves from the big box store. The cut resistant material is smoother, breathes better, and doesn't get the same nasty funk as the cottom. And of course, it will offer better protection when working with hand saws, mower blades, rusty metal, etc.

These gloves in particular have reinforcement in the thumb crotch, which is usually the first point to fail in this style of glove for me.

The sizing is spot-on too; the size large in these fits me perfectly, and is the same size as large from other brands too.